 |
| Color: | |
|---|---|
| Quantity: | |
Hammer vein powder coating
FEIHONG
1111111
Powder coating is a new type of 100% powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
Most powder coating is used by electrostatic spraying on the metal surface, and then cure in oven, eventually form a solid layer.
Applications of Product powder coating powder paint:
Our Service:
OEM Manufacturing available: Product, packing with carton.
Sample available.
We will reply you for your inquiry in 24 hours.
After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
General Types:
Polyester / Hybrid powder coating.
Hammer tone finish color powder coating.
Metallic powder coating.
Hammer tone finish color powder coating.
Texture color powder coating powder(We often export RAL 7032,RAL 7035,RAL7040,RAL 7042 ,RAL 2004 ,RAL 9005 , RAL 3020 fine texture ).
Textures include sand grain, hammer, silk pattern, sand textured, metallic, vary colors powder coating.
Physical Properties:
Curing Conditions:
180 °C ~ 200 °C (work piece temperature) for 10-15minutes
Average Coverage:
8-12 square meters / kg, thickness 60-80 microns (100% of the powder coating utilization rate).
Packing:
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight and 25 kg net weight.
Powder Coating Application:
Storage And Transport:
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
Health and Safety:
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating.
Mechanical Property:
